Description
Information
The Rotix is a manual “chain” scanner. It is designed to provide encoded probe position of probes circumferentially around tubes and pipes. The Rotix is completely configurable for both phased array and traditional UT (Ultrasonic Testing) with single or multiple probes.
Features
Adjustable Chain
Quick release chain links allow simple and efficient scanner setup on various pipe diameters.
Probe Positioning System
Adjust probe centre spacing as well as position the probes over a weld without scanner removal required.
Two-Axis Scanning
Optional mini encoder available for two-axis scanning.
Built-in-Encoder
Fully compatible with all standard instruments, this precision encoder is integrated into the scanner body.
Modular
Chain link system compatible with other scanners.
Specification
Circumferential Pipe Range
3.8 – 96.5 cm (1.5 – 38 in) to flat
Encoder Resolution
19.2 counts/mm (487.7 counts/inch)
Probe Holding Capacity
- Two phased array wedges
- Two TOFD wedges
Umbilical length
5 m (16.4 ft)3
Inspection Surface
Ferrous or non-ferrous materials
CLEARANCE RANGE
| Clearance: | 10.2 cm (4 in) |
|---|
SIZE & WEIGHT
| Cart Height: | 8.12 cm (3.19 in) |
|---|---|
| Cart Width: | 8.03 cm (3.16 in) |
| Cart Length: | 17.11 cm (6.73 in)2 |
| Cart Weight: | 0.77 kg (1.7 lb)3 |
